Eos Maxpro 12l 1400w Eai12i Vacuum Cleaner Replacement Sack Purchase
12-27-2025 – AliExpress
- AEsearch: vacuum cleaner sack
- AE: Vacuum Cleaner Bags for Karcher 6.959-130.0 WD3 MV3 WD3 Premium Wet & Dry Vacuum Cleaner, SE4001 MV1 WD3200 WD3300 A2204 A2656 – purchased 20 of these. All dimensions good
Notes: Porto Pel Paper Company
- Sacks came with the "Porto Pel" logo
- The company sells many different types of paper
- PortoPel.com
Vacuum Cleaner Model: Aspirador De Pó E Água Eos Maxpro 12l 1400w Eai12i
- Inquired with vendor on MercadoLivre: He referred me to: Frigelar
Filter Sack Dimensions of original
- 21cm x 46cm
- Hole: Overall Diameter = 6cm
- Hole: In the rubber gasket = 4cm
Research Links – Search for replacement.
- MLsearch: saco: em saco aspirador
- MLitem: Kit de 3 Sacos Descartáveis ??para Aspirador Wap Gtw Inox 20
- MLitem: Kit 3 Sacos Descartáveis Aspirador Pó Wap Gtw 10 – bought for test. See notes below.
- MLitem: Saco Aspirador De Pó Wap Gtw 10 Kit C/06 Refil Descartável – Same item as #3 with higher unit cost
- MLitem: Saco De Aspirador De Pó Wap Gtw10 Gtw12 Gtw Maré 6 Unidades – bought this. Made it work but more work and not as good a fit as #3. See notes below.
- MLItem: 6 Sacos Do Aspirador De Pó Wap Gtw10 / Gt W10 – Minimum unit price: 40R for qty = 6 > 6.66 Reais per unit
Item #3 Dimensions and Results
- This item is the best solution so far – only modification required is to cut the hole to Diameter = 6.5cm
- No gasket needed. Cardboard ring catchs on ridge of fitting
- Sack dimensions are near perfect to sit correctly in the tank
- Sack Dimensions: 56cm x 23cm ( height is 2cm larger than original which is ok – sits on bottom )
Item 5: Dimensions and Results
- this item did not work well > procedure went like this:
- Cut the plastic mounting ring out of the sack with w/ minimum hole possible
- Cut a cardboard mount out of a cardboard tetra milk box carrier – has the right density
- Glue to the sack
- Sack will not rest on the bottom of the 12L vacuum tank. Shorter than original – does not rest on bottom of tank
- Will work but extra work
- Only advantage was unit price
