Bartlett KISS Kiln Control Software
Research Links
- Kiss Starter Kit with USB Connection
- Bartlett: Kiss Starter Kit
- Jesse Hull – died – Was KISS software beta tester – worked with Bartlett Instruments President, Dave Bartlett on creating and testing both potential and applied advancements for the V6-CF kiln controller (the motherboard at the heart of L&L's 'Dyna-Trol') and the K.I.S.S. data-logging software system.
- Bartlett Kiln Models
- Kiln Interface & Datalogger Software System (K.I.S.S.)
- Specification Sheet for DynaTrol Control
- DynaTrol Easy-Fire Profiles in Deg F and Deg C (Excel Format)
- Quick Start Instructions for KISS Software System
- KISS Kiln Software Sample Screens
- KISS Kiln Software Installation Manual
- KISS Kiln Software Operation Manual
- 2019 Price List and Mini-Catalog
Emergency Stop: Budget Inn Exit 113 in Conway Missouri – Have land lot next door they will let you leave equipment
Research Links
- Budget Inn – Conway Missouri: 417-589-2503 Map:I-44 – Exit #113 – They own the large lot next to the motel where they will let you drop large equipment for a while if you are in trouble. Very large. Semi tractor trailer would easily fit.
- Google: Rocking Chair Restaurant: Right next to the Budget Inn. Thus if you are stuck for a bit there without car due to it being in a shop you can hunker down and still be able to eat.
- Google: Lebanon Missouri AutoZone – (417) 588-5887
- Lebanon Missouri O'Reilly Autoparts
- Sawyer Tire – Lebanon Missouri – Open 8AM to 12 noon on Saturdays. It is one of the few if not only place open on Saturday in Lebanon. Savannah did a really good job of shoe horning me in on the spot.
When my van which was pulling a heavy Uhaul trailer popped a "Service Engine Soon" code I was lucky enough to be just short of Conway Missouri on I-44. I exited on exit #113 and decided to stay the night in the Budget Inn there. The van was running more or less with just a stutter / jerk every so often. Still I wanted to read the code and find out if it was going to die in a relatively short period of time. As luck would have it the couple who run the Budget Inn are a kind lot and had pitty on me. Ben drove me 17 miles to the Lebanon Missouri Autozone where I bought a code reader. When we got back to the motel I read the code and it said "Right side cam shaft position sensor fault". A call to my favorite mechanic yielded the result that I could limp home without service albeit slowly. I opted to stay the night and see if I could get the part the next morning and either put it on myself or find a mechanic. I was a bit frazzled from all the driving so a mechanic was the better option but who would I find open on a Saturday? When I woke up Saturday morning I drove slowly to the Autozone and bought the sensor. At that point I asked them if they knew any mechanics open on Saturday. They said Sawyer Tire was one of the only places open. I called and Savannah was very helpful promising to get me in. I went there directly and the mechanic figured out that there was only 1 cam shaft position sensor and it was on the left side. It was easily accessible and was swapped in under 15 minutes.
So if I am ever passing by again with car issues I am noting this so that I can hole up there and get my car fixed. A bonus was that the internet in the room functioned well. That made researching what to do online much easier.
Duralast SU266: Cam shaft position sensor
Additional Information
- Marshfield Towing: 417-859-6385 – did not need to use
- Auto Repair & Services: 19950 Highway W, Lebanon Mo 65536 – did not use.
LED Lighting and Lighting Effects For Original Kitchen Area
The old kitchen is pretty funky now. But the floor needs redone. DIRK!
This is my research into LED lighting for my home remodeling projects. There is large variety of LED forms on the market. Out of all the stuff below I chose an LED with color ring that I found on ebay.
Ebay: White RGB Dual Color LED Light LED Ceiling Recessed Panel Downlight
Trying to change time zone in Windows 7 and the clock software freezes
I moved time zones and I could not change time zones because the software would freeze. Naturally I assumed it was more Microsoft quirks. However I was finally able to get it to take the change in time zone by going to the INTERNET TIME tab, clicking on the CHANGE SETTING button and unchecking the SYNCHRONIZE WITH AN INTERNET TIME SERVER box.
U Haul Trailer Hitch Design
Moved my mini storage contents back to Ohio. That was some work.
1k11V6U824
Specifications & Measurements
- Hitch ball size: 1 7/8 or 2 inch ball.
- Maximum hitch height is specified as 25 inches
- Measured natural height of trailer hitch ball receiver: 19 inches ground to bottom ( stopped by a U Haul to get this number. It applies to the hitch seen in the diagram above. Simpler version without auto safety break will be slightly lower.
- Height of the top of the square of my hitch receiver is: 14.5 inches
A rise of about 3 inches would put the hitch at the natural height. Will use the bigger ball.
Research Links


