Bed Bug Billy – Gotta Scratch That Itch – My Strategy Against Bed Bugs

NOTE:  If you stayin Saint Louis you may want to avoid the Saum Apartments.  That is where I developed this process.

The solution that finally gave relief is diagrammed below. This trap works on the principle that bed bugs can not climb on slippery surfaces such as the plastic sheeting utilized. After implementing it the bedbugs that I found in the morning looked more emaciated by the week. At first they regularly showed up every morning.  Within 3 weeks they were not showing up in the morning any more on any sort of regular basis.  After about 1 month they stopped showing up in the morning except for one at the 2 month mark.   This solution is a good one because replacing the mattress would have resulted in it being infested by the hold outs in the carpet. 

PLEASE NOTE:  Your sheets and blankets must stay on the top flat surface of the bed. Avoid draping over the edge of the bed or you will give your little friends a way to latch on and climb up to feast on you.

Bed-Bug-Trap-that-works:  It utilizes the principle that bed bugs can not walk on slippery surfaces

This video shows how vulnerable they are to slippery surfaces.  Once on his back he can not right himself.

Links – In use

Discontinued Strategies

Heating Strategies

Mattress Heating Strategy #1:  Plastic sealing up 10x10x10 cube around mattress and box spring. 2 1500 watt heaters on.  Only made it up to 94 degrees on a 70 degree day.  Need better heaters!.  Plastic Sheeting from Home Depot used.

Mattress Heat treat strategy parts required

  • SSR (solid state relay)
  • metal pipe 3 feet long minimum
  • slippery box spring stands to get the bed up off the floor
  • Heat gun

Other Strategies 

Locations

We are occupying BedBugLandia.  Thus the correct attitude is continuing vigilance. I woke up bite free after initial application of above noted measures. I found 2 bedbug Billys at the base of the bed.  Vacuumed around the base of the bed and did an inter mattress inspection.  It's going to be a long occupation.

Notes

  

The simple truth is life was better there before "div__sity". 

List of Cell Phone Carriers Modulation Type CDMA or GSM

Here is an overview of all GSM and CDMA based cell phone networks and carriers including their signal frequency in the United States. Updated: October 30th, 2008.

USA GSM Networks & Carriers:

  1. Advantage Cellular Systems Inc (GSM 850)
  2. Airadigm Communications (GSM 1900)
  3. Alaska Wireless Communications, LLC (Dutch Harbor) (GSM 850)
  4. Alltel Communications Inc (GSM 850/1900)
  5. Arctic Slope Telephone Association Cooperative (Artic Slope Telephone Association Cooperative) (GSM 850)
  6. AT&T Mobility (3G 850/1900)
  7. C T Cube, LP (GSM 850)
  8. Caprock Cellular Limited Partnership (GSM 850)
  9. Cellular Properties, Inc (Cellular One of East Central Illinois) (GSM 850)
  10. Centennial Communications (GSM 850)
  11. CGKC&H No. 2 Rural Cellular LP (West Central Wireless) (GSM 850)
  12. Chariton Valley Communications Corporation Inc (Chariton Valley Communication Corporation) GSM 1900
  13. Choice Wireless LC (AmeriLink PCS) (GSM 1900)
  14. Cincinnati Bell Wireless (Cincinnati Bell Wireless – Cincinnati, OH) (GSM 1900)
  15. Commnet Wireless, LLC (GSM 850/1900)
  16. Convey Communications Inc. (GSM 1900)
  17. Cordova Wireless Communications Inc (3G 850)

 

……more

Qt Internationalized I18n Hello World Example Demo Project

Links

Tools

Auxiliary Links

Source Code

  • hellotr  currently not functional – does not display the translation  

QUCSEdit stand alone compile errors

Appears to be 2 types of errors 

  • Errors due to class changes going from Qt3 to Qt4 – These could probably be addressed with correct switch to include q3support library that is included with Qt4.  I copied the q3textstream.h to the working directory to get around referencing error.  By not setting this I am forcing all the references not compatible with Qt4 to surface.
  • Errors due to the translation files not being available for access

 

freemonsandlewould@desi:~/Documents/qucs-edit$ make
g++ -c -pipe -O2 -Wall -W -D_REENTRANT -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/share/qt4/mkspecs/linux-g++ -I. -I/usr/include/qt4/QtCore -I/usr/include/qt4/QtGui -I/usr/include/qt4 -I. -I. -o main.o main.cpp
main.cpp: In function ‘bool loadSettings()’:
main.cpp:44:14: error: ‘homeDirPath’ is not a member of ‘QDir’
main.cpp:64:8: error: ‘class QFile’ has no member named ‘setName’
main.cpp:64:16: error: ‘homeDirPath’ is not a member of ‘QDir’
main.cpp:73:36: error: ‘class QString’ has no member named ‘stripWhiteSpace’
main.cpp: In function ‘bool saveApplSettings(QucsEdit*)’:
main.cpp:95:14: error: ‘homeDirPath’ is not a member of ‘QDir’
main.cpp:105:43: error: expected ‘;’ before ‘PACKAGE_VERSION’
main.cpp: In function ‘void showOptions()’:
main.cpp:116:55: error: ‘PACKAGE_VERSION’ was not declared in this scope
main.cpp: In function ‘int main(int, char**)’:
main.cpp:150:30: error: ‘BITMAPDIR’ was not declared in this scope
main.cpp:151:28: error: ‘LANGUAGEDIR’ was not declared in this scope
main.cpp:162:12: error: ‘locale’ is not a member of ‘QTextCodec’
main.cpp:172:68: error: cannot convert ‘QString’ to ‘const char*’ for argument ‘2’ to ‘int fprintf(FILE*, const char*, …)’
main.cpp:176:22: error: ‘const class QChar’ has no member named ‘latin1’
main.cpp:182:67: error: cannot convert ‘QString’ to ‘const char*’ for argument ‘2’ to ‘int fprintf(FILE*, const char*, …)’
main.cpp:189:67: error: cannot convert ‘QString’ to ‘const char*’ for argument ‘2’ to ‘int fprintf(FILE*, const char*, …)’
main.cpp:196:5: error: ‘class QApplication’ has no member named ‘setMainWidget’
make: *** [main.o] Error 1

Migration Qt3 to Qt4: They changed the name of class members that APPEAR to do the same thing.  

Modified File: qucsedit

Auxiliary Links